How to Setup UltraLink WiFi Extender Device First Time
UltaLink WIFI Extender is a smart way to extend your existing wifi network without changing your WIFI name without a physical connection. Ultra Link Wireless N300 Universal Range Extender works with most of the leading brands WI-FI routers such as TP-Link, Netgear, D-Link, as well as many other Dual-band and single-band WiFi routers and access points.
UltraLink WiFi booster is a N300 single band 300 Mbps Signal booster so you can only connect with a 2.4Ghz wifi band. Ultralink WiFi repeater devices support multi Wireless modes such as Repeater, AP mode and Router. Ultralink’s Omni directional Antenna gives you the best signal coverage in all directions and fixes wifi range issues in the dark spots where main WiFi router signal not reach.
There are two ways to setup an Ultralink wifi repeater device using wired from Ethernet connection as well as a WPS push button method that does not require any physical connection or login process. WPS setup method is a quick way to connect the wifi repeater to your host WiFi network without login and no WiFi password needed to connect. WPS method is the physical process so you can only use it when you are near WiFi router and extender device to process physical setup.
n The Best WiFi Range Extender Device to boost Signal
Ultalink Wifi Extender Setup Using WPS Button
Setup ultralink Wireless Range extender using the WPS push button is a simple and fast method to configure your signal booster device to extend the booster. Follow the steps to configure the Ultralink WiFi range booster device using the WPS button.
- Unbox your Ultralink WIFI Extender/ signal booster/ Wifi repeater device.
- Plug the extender device to the power socket near your main internet router.
- Locate the WPS button on your main internet router and press the “WPS” button for 2 seconds.
- Within 2 Minutes Now press the WPS button on your Ultralink extender device.
- Now monitor extender LED light will solid green after a successful connection with your host WiFi router.
- After the setup process finishes you will get a new Extender WiFi name added EXT on your main WiFi name. Exp- if your existing wifi name HOME-WIFI then the Extender wifi name will be HOME-WIFI_EXT. The WiFi password will be the same for the extender network as your existing wifi password.
- Once the extender device is connected now relocate it where you facing the signal-poor issues.
- While moving the extender device monitor LED light to check signal strength to get stronger connectivity with the Main internet router.
- While moving the extender Led light will be Blinking Orange and keep it until you get a Solid green LED light.
BUY NOW
If you facing an issue while trying to setup WiFi repeater device using WPS button and not getting a successful connection then you can use the second method using the web interface from mobile /Laptop /PC.
How to Fix WiFi Signal issue using Old WiFi Router
How to Setup Ultralink WIFI Extender using Web interface?
Configure range extender device using web Gui method required to login device using wired or wireless connection to access settings.
Ultralink default Login IP address– 192.168.0.254
Default username /Password- NA
Follow the steps to login Ultralink WIFI extender device to connect with your existing wifi network.
- Connect the Ultralink Repeater device to the power Socket and power ON.
- Search WiFI name “UL-INT_EXTA9” from the mobile/Laptop and connect from your phone and Laptop/Desktop.
- Open web browser and access http://192.168.0.254 or 192.168.0.254.
- You will get an extender Scan page where all wifi networks are scanned and show a list of all nearby WiFi networks.
- Select your existing wifi name from the list you wish to connect from the UltraLink repeater.
- In the next page, you will get the option to provide your Existing wifi network password.
- “Base station Wifi name – UL-INTEXTA9- Provide the password and press the finish button.
- The extender device will take a few moments to save the settings “Extending Wait”
- Extended Successfully – Please connect again.
- Now check from your phone and Laptop you will get a new WIFI name for the Extender network.
- Now relocate the extender device to the location where you facing signal issues.
- While moving the extender device make sure the Extender LED light shows Solid green to get good signal strength from the host wifi router to the extended network without dropping the signal and internet speed.
Troubleshooting and F&Q for UltraLink WiFi Range Extender
If you facing any issue while connecting Range extender or some common questions and answers that you may want to ask.
Why UltraLink WiFi extender not connecting Using WPS button?
If WPS button not working with your WiFi router reason may be your host router WPS Option is disabled from the settings so button not working while you trying to connect. Login your main internet router and enable WPS pin method under wireless settings and try again.
What is the Ultralink WIFI Extender default Login IP address?
Default login IP address is 192.168.0.254 that same printed on the sticker.
What is UltraLink default username and password for First Time setup?
There is no username and password required during first time setup of Ultra link extender device.
Why I can not login Ultralink Extender device using default IP address?
Make sure you are connected to the Ultra link Extender SSID name before accessing the IP address from the browser. Also, check if your LAN/WIFI Ethernet is not configured with a manual IP address. Make it to Automatic (DHCP) and try accessing again.
How to Factory Reset Ultra Link Range Extender if Forget Password?
If you forget password or unable to connect your extender device than you can hard reset using the reset button available on the extender.
- Power ON the Extender device first.
- Press the Reset button for 10 seconds and release.
- LED light will Turn off suddenly and turn on again after reset process is done.
- After resetting you will get the default SSID name as printed on the extender sticker.
How to setup Ultralink signal booster if there is no WPS button on Host Router?
If your internet router does not support WPS button or the WPS button not working then you can use Login method to connect the repeater device as follow above second methods.
Final Word
This simple Ultralink range extender manual to boost your wifi signal range without using any physical cable or without adding the additional wifi router. Although, if you have an Ultra link single band or dual band extender device the method will be same to setup signal booster using WPS or login methods. If you are facing any issue while trying setup then you can also get Ultralink wifi extender setup manual from the official support website.