10.10.10.10 Login Router with Admin Password
10.10.10.10 is a C class IP address from network 10.10.10.0/25 subnet. It is used as the default gateway IP address for login routers first time by many router brands such as Itus Networks Shield Pro. The default LAN IP address is a preconfigured IP address used to set up the router’s first-time configuration as per internet settings. Any of the cable mode, wireless or wired router, network switch, IP camera, NVR, DVR with 10.10.l0.10 default IP address can be accessed from a web browser within a few steps as followed by this manual. If you have any WiFi router or cable modem with a 10.10. 10.10 default login IP address and not sure how to log in to your router then this user guide will help you.
Along with the default login IP address for authenticating username and password also required for the first-time setup usually printed to the router sticker and a quick user guide is included with the box. Take your modem or router to hand and check for default login details for first-time access. However, you can also use the username and password combination as given below. To login router using 10.10.10.10.1 there is a connection required with the router either wired or wireless that depends on the router-supported interface.
The default username and password for 10.10.10.1O
The first way to get the default login IP address and username password is to check the modem sticker printed with all router details along with login information. however, get the login username and password below that you can also try with your modems.
Login IP – http://10.10.10.10
| Username | Password |
| admin | itus |
| admin | admin |
| admin | password |
| admin | 1234 |
Get login credentials for your modem and network device and follow further steps to access settings.
Steps to Login Router web interface
Once the default login settings ready with you now the next step is a physical or wireless connection with the device you looking to access from web browsers.
- Unbox router /modem if trying to set up a new device the first time and power on with the DC adapter included with the box.
- Use default SSID and WiFI password printed to the router for wifi connection from mobile, laptop or computer for wireless connection.
- Use standard LAN cable for wired connection from router LAN port to PC LAN port.
- Go to Windows/Mac or Linux LAN configuration and make sure the DHCP option is enabled or use 10.10.10.254 as static IP to make PC in the same network. Do not use static IP 10.10.10.256 as It will invalid IP.
10.1.10.1 Admin login Username and Password
Access Router IP to the Web browser
Open a web browser and access http://10.10.10.10 and wait to load the login page.
Provide username and password as default settings for your router printed to a sticker.
After successful authentication, you will get a router control panel with full settings access where you can set up WAN, wireless, Port forwarding, Mac Access-list and other settings.
Change Wireless SSID and Password
If your router is already been configured and using the old Wifi name and password for a long time then you must update it from time to time if set up a new router for the first time then change the default WiFI name and password for the security of your wifi internet.
Go to Wireless settings- Basic settings
Network Name (SSID)- change the default wireless name here and create a new wifi name as per your choice.
Broadcast SSID- Enabled
Channel – Auto
Wireless Security
Wireless Security- WPA2-PSK
Wireless Key- WiFi-Password (create a strong password for your wifi network using alfa numeric and special characters.
Save settings and you will be disconnected from the router if using the wireless connection. Connect again with new wifi name and password again and log in again to configure other settings.
Change Admin Login Password
Also very important to update your login password along with a wifi password from time to time to keep secure your home network and devices.
Go to Administration / Maintenance /System (the option may be different for different brands and models)
User Account
Old password– admin (or use login password used for login)
New password– create a new password
Confirm New password– Confirm new password to avoid spelling mistakes.
If you facing any issue while accessing the Login IP address or 10.10.10.10 not working while logging to the router for the first time. You can factory reset using the reset button to reset the router to default mode and set up again with fresh settings follow the above steps to configure again.
Related Post
- 192.168.1.1 Admin Login Password
- 192.168.1.0 Admin Login Router
- 192.168.254.254 Admin Login Password
- 192.168.3.1 Admin Login Router