In this digital age, it’s vital that attendees can stay connected at conferences and trade shows. Big events such as sporting events, music festivals, trade shows and conferences all require internet access. Attendees anticipate fast reliable wifi hotspots of wireless coverage without interruption. However, this is not always how things work out. This article details the technical aspects of common connectivity problems at large venues while putting forward solutions that are more advanced & economical than typical venue offered options.
WiFi and Network Connectivity Problems Technically Explained
User Density Issues:
In areas with a high user density, thousands of devices can simultaneously attempt to link up. When there is a large number of people in one place, such as at big events: conferences, professional shows, and exhibitions this phenomenon occurs causing network overlap among them all that deforms into what we call ‘high user density’. The wireless spectrum is of limited range and when many devices simultaneously attempt to use this congested medium, their performance levels will fall greatly as a result.
Radio Frequency (RF) interference is one of the biggest headaches, and particularly so when there are numerous other networks in a given area that also compete with yours to control transmission. Moreover, microwaves, bluetooth devices and other wireless equipment can all interfere with the signals. As a result, packets are lost and takes longer for data to be transmitted, hence increasing latency.
Since WiFi signals are so susceptible to interference, all electronic equipment in the area —whether it be appliances or metal barriers- reduce the signal’s strength and acts as an obstacle or obstruction. Whenever this happens, wireless internet connections are lost and dead zones develop within the building where people can no longer get online.
The transmission of Wi-Fi signals is in the vicinity of WAP, which can be said to virtually guarantee that any electronic device or metal structure will weaken WiFi signals gradually over time. This has become one of the reasons for bad connections as well as “dead corners” in places like university campuses or hotel complexes, where there are now areas with no coverage at all anywhere within the establishment.
WiFi Repeater Vs Range Extender?
Bandwidth Management:
Large events often under-rate the required bandwidth to support expected user numbers. Bandwidth constraints can cause throttling, with low speeds and long loading times particularly when using data-hungry applications.
Dual-Band and Tri-Band Access Points:
Recently launched platforms now support dual-frequency wireless networking. APs that use only one frequency make it impossible to achieve both high capacity and complete radio coverage at all places across a large area or office floor. Dual-band APs give preferential treatment to 5GHz devices, which are slower than the 2.4 GHz devices but themselves occupy much less airtime. As a result, a 5GHz phone spends less time on the air talking to such APs with correct dual-band support than it would with a traditional single-band 2.4 GHz telephone. There is actually one further improved frequency slot: tri-band APs come with two pairs of 5GHz+2.4GHz bands. Therefore, as shown in the figure, two Suzannas can simultaneously hop on different parts of the same AP and double capacity compared to earlier ‘shared-frequency’ systems which usually drop at least 50 percent of total throughput by not making whole usage of all available frequencies.
Advanced Channel Management:
Intelligent management among channels
is an essential part of reducing co-channel and adjacent channel interference between neighboring cells’ signals. Techniques such as Dynamic Channel Assignment (DCA) and Channel Bonding can help improve channel usage. DCA actively delete bg channels based on up-to-the-minute interference and usage situations, while Channel Bonding combines channels together and thereby congregates their total bandwidth.
What are the scalable bandwidth solutions?
By joining forces with an event Internet providers like TradeShowInternet which are able to supply scalable bandwidth, the network can cope with peak loads. Fiber optic connections and back-up lines can together provide high-speed high-capacity bandwidth that is indispensable for large-scale events.
Your Service Partner for Connectivity
Complexities abound in the world of event WiFi. What is needed is a great deal of skill and the right kind of technology. Trade Show Internet is adept at supplying special WiFi solutions for large-scale events. Reliability is not something that can be compromised.
A large number of technical challenges must be faced in order to maintain high site coverage, stable network signal and fast WiFi network during large meetings. Trade Show Internet provides both the expertise needed and top-class infrastructure to clients to ensure their events have uninterrupted connectivity that enhances everybody’s experience in The accurate perception of the event. By applying their tailored technical solutions, high-quality equipment and seasoned support, event organizers can use their modern digital age solutions and focus on the event versus dealing with IT matters.
Technical Aspects of WiFi Network Connectivity Problems can fix and avoided if we consider all the things that can make a problem in WiFi network during large Events.
Related Post
- AC1200 Vs AC1900 Dual Band WiFi Router | Which one is Best?
- List of Best Gaming Modem with Gigabit Speed
- Best WiFi Extender For Fios Ultimate Buying Guide 2022
- How to Fix Spectrum Router Red Light Error ?