Indihome Router Login To Setup First Time
Indihome is an Indonesian internet service provider providing internet and voice services to end users. Indihome Router comes with different brands as Indihome is only an internet provider, not a manufacturer so Indihome routers are powered by different brands.This article gives you a simple user guide and manual for Indihome Router Login and setup for first-time to nontech person.
Inidhome Internet uses Huawei, FiberHome, and ZTE brands so to login to the Indihome router you can follow login guide of those brands. To Login the Indihome router you first need to confirm which manufacturer’s router installed with your internet plan that is provided by Indihome.
Default Login IP address, Username, and password can be different for Indihome modems than ZTE, Huawei or Fiberhome so you need to check your router details to get default credentials for your Indihome router default login settings.
Indohome wifi router or internet modem can be single band, dual band, or Gigabit wifi 6 WIfi modem depending on the internet plan you subscribed from Indihome. However login method for Indhome signal band or dual band wifi router is the same only login credentials and settings can be different for each.
Indihome Router Default Login IP address, Username and Password
As Indihome uses different brands of modems and routers to connect last-mile connections, login credentials will also be different for each brand. First, get the login details from your modem installed at you’re your home or try the given below.
| Brand name | IP address | Username/Password |
| ZTE zte zxhn f609 | 192.168.1.1 | Username: admin Password: admin Username: user Password: user Username: admin Password: zep2kjzol Username: admin Password: Telkomdso123 Username: root Password: admin |
| Huawei Indihome huawei hg8245h5 login | 192.168.1192.168.100.1 -192.168.l00.1 Admin Login Router First Time00.1 | Username: telecomadmin Password: admintelecom Username: telecomadmin Password: zep2kjzol Username: admin Password: admin Username: root Password: admin |
| Fiberhome | 192.168.1.1 | Username: admin Password: admin Username: admin Password: %0|F?H@f!berhO3e Username: user Password: user1234 |
You can get your Indihome Internet router login details printed on the sticker along with the router model number and other hardware and software information that help you to find the latest release firmware as supported by your router.
Indihome Router connection and Login
Accessing Wifi router or fiber modem needs a connection between the router and mobile/laptop/desktop that can be either wired or wireless. It would help if you had a LAN cable for physical connection or also can use wifi to access router settings. Follow steps below to connect and Indihome ZTE login as well as Fiberhome or Huawei router.
- Internet cable from ISP/ONT/ADSL/VDSL Modem should be connected to the WAN port.
- Connect LAN cable from Indihome Router LAN port to Computer/Laptop or Network switch.
- To use the WIFI connect the default WIFI name or default wifi password as printed on the sticker if its a first-time login.
- Open the web browser and access 192.168.1.1 for ZTE and FiberHome and for Huawei 192.168.100.1.
- Use the default username and password as printed on the router sticker to access the router settings control panel.
- After Indihome login router, you will get all the settings where you need to configure WAN, and Wireless as per your internet type and plan.
Mywifiext not working | How to Login Netgear Extender?
Indihome Router WAN Internet Configuration
To configure WAN settings you first need your internet settings as per your internet type from your Internet provider. You can contact to get wan settings from your internet provider if you are a end user.
Go to the WAN option from the router which can be a different location from ZTE, Fiberhome, and Huawei.
Internet – WAN
WAN settings
Internet Type- PPPOE/ Static or DHCP
Choose your internet type and provide settings details accordingly as provided by your internet provider.
If the internet type is PPPoE then get a username and password or for static IP get IP address, Gateway, and DNS settings.
Once you provide the correct settings WAN status should up and the internet working.
After WAN settings now follow the steps to change the default wireless and password to secure your wifi networks.
Indihome WiFI Router Name and Password Change
Indihome WIFI Router/ Fiber ONT modem preconfigured with default SSID and password so always change default wireless settings before using to internet.
Go to Wireless settings
Wireless- Basic Settings
For Dual-band, you will get 2.4G and 5.8Ghz wireless settings.
Go to Wireless 2.4G
Wireless Radio- Enable
SSID (Network name) – Change WiFi name here
Wireless Channel- Auto
Wireless Security Key- WPA/WPA2_PSK
Passphrase– Change the Default WiFi password here.
After saving settings go to 5.8Ghz wireless settings and change the WIFI name and password by following the above steps.
Once both wifi SSID and password are updated you need to connect all wifi devices again with a new password or if using any other iOT devices.
Change Indihome Router Admin Password
Changingn Indihome ZTE Router login password or changing indihome Huawei Router password is same steps. You can change the Indihome admin login password from the Administration or System settings.
Go to the “Administration” option from the left side menu for ZTE and “Management”– User Account for Fiberhome.
User Account
Change Login Password
Old Login password – admin (check default password for your router)
New Login password– create a new login password
Confirm New password– Confirm new login password.
After changing the login password keep your admin password safe and avoid writing over the router sticker. You require a login password whenever you want to log in indihome router to change your password or making any configuration.