192.168.0.200 Admin Login Guide
192.168.0.200 is the default login IP address from the network 192.168.0.0 and is used as the default gateway IP address by a few router brands. The login router with 192.168.0.200 IP address is similar login guide as the login router using 192.168.0.1 or 192.168.0.254.
Any router or modem with default IP address 192.168.0.200 can access using this login guide either using mobile or a computer. Wifi router and Cable modem as well as the FTTH fiber modem default login guide using IP address 192.168.o.200 is the same so if you have any of the managed devices that can access using the web interface then you can use this guide.
Login 192.168.0.200 is also protected with a default login username and password for the web interface that is usually printed on the router sticker along with the device model number and other hardware and software information. Find the default admin password for the 192.168.0.200 IP address and follow further steps to log in from a web browser. Follow the router login guide from connection to updating settings.
Steps to Access Router with 192.168.0.200
First, you need to get the default username and password for your DSL/VDSL, Cable modem, or Wireless router whatever you looking to access your default IP address is 192.168.0200.
The default username and password for IP address 192.168.0.200 are printed to the sticker or get below that work with mostly router models.
| Username | Password |
| admin | admin |
| admin | password |
| admin | 1234 |
| admin | na |
| root | admin123 |
If you lost the default login credential sticker due to an old model or router just try the above combination and follow the next step to connect wired or wireless.
Connection and Login Web interface from Mobile or computer
The next step is a connection with the modem or router that you wish to access. You can use wifi or a wired connection as per your modem-supported interface to access the web interface.
- Connect Router/Modem/Network switch using the power adapter and make it power ON.
- For the WiFI router find the default SSID and password printed on the sticker to connect using wireless.
- Use LAN cable from Router LAN port to Laptop/computer LAN port.
- Make sure LAN settings on the Desktop or laptop is in automatic mode to get IP from the router.
- Open the web browser and access 192.168.0.200 or http://192.168.0.200 to the URL.
- You will get a login page where you need to user the default username and password to access settings.
- Provide the default login password and username as printed on your router sticker.
Login 192.168.10.1 IP Address with admin password
Once you are able to access the router’s advanced settings where you can change Wireless and Network settings as well as confirm other security features to protect your wifi and wired network. Follow the next steps to change your Wireless SSID and WIFI password from the default name to the new name as per your choice.
Change the WIFI name and Password
WiFi router and Wifi modem both are preconfigured with default WIFI names and random default passwords that are easily available on the internet and router sticker. It is always recommended to avoid using the default WIFI name and password to secure your wifi network. Follow the steps to change SSID for 2.4G and 5Ghz wifi band if your router or modem supports dual-band.
Go to the Wireless tab from the top settings menu or some router left-side vertical menu.
Wireless- Basic settings.
Wireless – Enabled
Wireless SSID broadcast– Enabled
WiFI SSID- WIFI Name here (give wifi name as per your choice )
WiFi channel- Auto
Channel width- Auto
Transmit power- Max
Wireless Security- WPA/WPA2-PSK_AES
WIFI Passphrase- WIFI security key (set a new WIFI password here. Avoid using personal details for wifi passwords such as name, mobile number date of birth that anyone can guess)
Save wireless settings and connect mobile and all other wifi devices with the new WIFI name and password. A device that is already connected will disconnect and need to connect again with a new WIFI name and password.
IP address 192.168.0.200 Not working
If the IP address 192.168.0.200 not working or you might not able to get a login page or take a long time to respond can be an issue with the network or configuration that can be fixed easily. To fix the IP address not working just confirm the below steps and follow the troubleshooting guide given below.
- Make sure the WiFi router turns ON and uses the original DC adapter that comes with the device.
- If using a WIFI connection make sure your mobile/laptop is connected to the same wifi signal that you wish to access settings.
- If using LAN wired connection check if the cable is connected to only the LAN port instead of the WAN port in the router side.
- Default IP 192.168.0.200 should not change with any different IP series or IP address during first-time setup. Use an IP scanner to scan new IP addresses if changed before.
- Use IP address in proper format such as 192.168.0.200 or http://192.168.0.200 all other IP address 192.168.O.200 or 168.0.200:18004, hppts://192.168.0.200, :443https://192.168.0.200/zm/index.php, http://192.168.0.200:88, 192.168.0.200:87450,http://192.168.0.200:8080, 192.168.0.200:8086, 192.168.0.200:9700, dd wrt 192.168.0.200, ip 192.168.0.200,192.168.0.200;3804. All IP address is wrong and will redirect to the error page only.
- If you get the login page but forget your username and password and the default not working then you can factory reset the modem using the reset button to restore factory settings.
- After the factory restores, you need to setup the router again for your internet connection by following the above steps.
Related Post
- 10.0.0.1 -10.0.0.0.1 Xfinity default Login
- 10.10.10.10 Default Admin Login Router
- 192.168.2.1 & 192.168.2.l Admin Login Router
- 192.168.0.50 Login Admin Password Router