192.168.178.1 Admin login Password
192.168.178.1 private IP address from C class network and used as default login IP for Fritz Box routers to login in default mode. FRITZ!Box 7590 AX is a WiFi 6 DSL modem for a high-speed broadband connection that needs to be set up the first time for internet configuration. 192.168.l78.1 Default IP address used for Fritz!box cable modem, DSL modem, WiFI 6 Modem, Docsis modem, and any other model that need to setup first as per your internet connection type.
Default gateway IP address 192.168 l78 1 for all Fritzbox router and cable modem pre-configured on default factory settings and also printed to router sticker box. Along with the default login, IP 192.168.178 .1 is also secured with a default username and password that are usually printed to the router table and mostly likely “admin” as username and password.
You need to connect Firtzbox router or any other router that default IP address 192.168.178.1 to access from the web browser using wired or wireless. Default login username and password might differ for each router, modem, and Firtzbox cable modem and can get from sticker as well as a quick user guide.
Best WiFi Extender For Fios Ultimate Buying Guide 2022
Default Username and password for 192.168.178.l
Default login settings for firtzbox and other cable modems or routers are available on the router sticker and user manual is included with the device box. if your router is Fritzboz then can use backup login IP http://169.254.1.1.
Default Login IP address – 192.168.178.1
Default username– admin
Default Password- admin or password.
Get login credentials printed to the router sticker and follow the next steps to access the router using 192.168.l78.1 using the default username and password from the browser.
Login 192.168.l78.1 from Browser
Login router or cable modem settings using default IP address need to connect using a wired LAN cable or using Wireless connection if modem or router support wireless. Follow steps to connect the modem or router for setup and access settings the first time.
- Unbox router and connect to power adapter as comes with box.
- Use a LAN cable for wired connection from the router Ethernet port.
- Connect using Default Wireless SSID and security key as printed to sticker for wireless connection.
- Make sure Computer/Laptop LAN IP settings are in DHCP mode or use static IP 192.168.178.2 to access 192.168. 178.1
- Open a web browser and access http://192.168.178.1 to the URL bar and wait to load the router page.
- Provide default admin username and password as printed to router sticker or if you have updated already use same login password.
Once you successfully log in to a router control panel where you can get WAN, Wireless, LAN, security, and other settings to manage your router and network.
Change Wireless Network name and SSID
Although during the first time of internet configuration DSL modem and router should be configured with WAN internet settings as depend on the internet type.
Most probably internet provider configures all the WAN internet settings while installing the first time so you can change the default Wireless and security key yourself to keep your internet secure.
Go to Wi-Fi -WIFI network tab.
WiFI SSID Network- Enabled.
WiFI SSID Name- Create a WIFI name here as you want to give it to your wifi.
Change Wireless Security
WiFI- Security
WPA-Encryption
WPA2-PSK
Network Key- Create a WIFI security key here for your WIFI network.
Save settings and the router will reboot and take a few moments to apply changes. After update, wireless settings check your new WiFi name and password should work.
Troubleshooting Login Issue
The troubleshooting part covers any error, login issue, or problem that comes due to any reason while trying to access your router IP address from the web browser. There are many reasons behind the IP address not working, the router is unable to access the login IP, and Getting the wrong username and password stuck at the login page can be fixed using a few steps as given below.
IP Address Not Working or Taking a too long time to Respond
If 192.168.178.1. IP address not working or login page not accessible or may some other issue that blocking router page to load. This problem comes from either the default login IP address already changed with a different IP address or a different IP series. Or maybe your computer, or laptop LAN IP is configured in a different IP series that does not belong to the 192.168.178.0 Network.
First, check IP address has already not changed with different IP.
Check if You are connected to a LAN port if using a Wired connection.
If everything is one then makes sure you are trying to access the correct IP 192.168.178.1 instead of the wrong IP format 192.168.l78.l, http//192.168.178.1 , www.192.168.178.1 , 192.168.178. or http.//192.168.178.1
Wrong Username and Password
If you getting a login page with 192.168.178.1 but are unable to login settings because wrong username and password issue.
Wrong or invalid username and password issues may come if you use the wrong default login username and password or default login password already changed with a different login password during the first time setup.
If you have forgotten your login username or password and are unable to log in then you can factory reset your router to restore settings to factory mode.
Reset Router to restore configuration
To make router restore into factory settings FRITZ!Box you need to press the reset switch using a needle or paper clip.
You have to locate a small reset button beside the Lan port or power socket or beside the router, depending on router’s model number.
- Power ON FRITZ!Box the DSL modem or router and wait a few seconds.
- Locate the reset push button or a small hole for the reset button press.
- Use a needle or clip to press the reset button for 10 seconds and release.
- The router/modem will restart automatically and takes a few seconds to restore into default mode.
- After resetting the router ping 192.168.178.1 and using the default username and password to log in to router settings.
Related Post
- 192.168.10.254 Admin Login Router Modem
- 10.1.1.1 Router Admin Login Username Password
- 10.10.10.1 Default Admin Login Router Password
- 192.168.2.1 & 192.168.2.l Admin Login Router