192.168.15.1 Admin Login Username and Password
IP Address 192.168.15.1 C class IP address used in various Wireless Router, Network Switch, and Broadband modems. 192 168 .15.1 is used in popular router manufacturers such as D-Link, Linksys RT31P2, WRT54G, Motorola, Sweex router, and many other cable modems and routers. The default gateway IP 192.168.15 .1 assing to LAN IP address for default login for the first time to setup router and the user can change later as per their choice to different series.
However, the default login IP address is pre-configured to every new wifi router, modems, and network device with a specific login username and password, that is usually printed to the router label and a Quick user manual comes with the device. Login 192.168.15.1 with default credential need to connect modem either wired or wireless connection. Follow the steps to access the router control panel using http://92.168.15 .1 or 192.168 15.1 IP address.
Default Username and Password for 192.168.15.1
Although default IP addresses can easily be discovered using network tools. username and password must be required to access the router settings page with authentications.
Default Login credential possible for Default Gateway 192.168.15.l
The first way to get router login username and password details are to check the router sticker printed with all the login details, second, you can check the router user manual that comes with a box.
If your router is older and sticker is damaged and the box is lost then try below username and password combination to log in to your modem/wifi router.
Username | Password |
| admin | NA |
| admin | admin |
| admin | password |
| admin | 1234 |
| admin | CLEAR123 |
| motorola | |
| sweex | mysweex |
| router | router |
The next step is a connection with the Broadband router or modem to login into settings.
192.168.0.1 Default admin username and password
Connection with Computer/Laptop or Mobile from Router
Your router may have 1 WAN port and one or more LAN ports for wired connection. If your router supports WiFi then you can see the external antenna of the router so now follow the connection steps.
- Use a standard LAN cable to connect the router LAN Ethernet port to the computer LAN Port or use the default WiFi SSID name and password to connect using the wifi network.
- Change PC TCP/IPv4 LAN settings to DHCP mode or use Static IP address 192.168.15:110 to make computer in same network IP series of 15.1
- Power ON router with DC adapter comes with box.
How to access WiFi Router settings using WiFi and Wired?
Login Router Web interface to Browser
Open a web browser such as Google Chrome, Mozilla Firefox, or Microsoft edge and access http://192.168.15.1 to URL bar, and wait a few seconds to load the login page.
You will get a login page asking for a username and password or only a password if your router does not require a username and password to log in.
Note: if you not getting the login page make sure you are using the IP address properly and avoid using the wrong IP such as 192.168 15.1, http// 192.168 15.1, or 192.168.15.l
Use default login credentials to access router settings and setup router configurations.
Login into the router control center gives you the right to manage wireless settings, LAN Settings, DHCP settings, Port forwarding, Firewall, and bandwidth management.
Changing the default wireless name and password is highly recommended to secure your network from unknown users so follow the next steps to set up wifi settings.
Change Wireless SSID and Password
Including wireless settings configuration in this login manual because it means your data and internet security that can’t be ignored.
Go to the Wireless tab from the settings menu.
Wireless basic
Wireless SSID Network name– Your WiFi name (change wifi name as per your choice)
WiFI channel- Auto
WiFi Security Key– WPA2-PSK-AES
Wi-Fi Key– create a new security key for your wifi network.
Save settings and you will disconnect from wifi network after updating wifi SSID and password.
The next important security step is to change the login password for your router.
Change Login Password
Default login username and password are easily available over the internet so always change login password during first time setup.
This is Linksys RT41P2-AT broadband router print shot but login password method same for other models and brands as well.
Go to Administration- Management for Linksys Routers and System option for some other brands.
Local Router Access
Router password – create a stronger login password.
Re-enter to confirm– provide login password again to avoid spell mistake.
Remote Router Access – if you want to remotely access your router you need to enable this option and provide a management port.
Remote Management– Enable
Management port- 8080 is the default you can use a different port.
The remote login IP address will be 192.168.15.1:8080
Save settings from the bottom to confirm changes.
Related Post
- 10.1.10.1 Admin login Username and Password
- Setup TP-Link extender to boost WiFi Signal
- The Best WiFi Range Extender Device to boost Signal
- TRENDnet Router Default Login | TEW-731BR