How to configure Madpower WiFi Extender
Internet today become an essential service for daily needs and we need good internet connectivity in every location. Probably internet service provider gives a WiFI modem or router that is not enough to provide a wifi range in every corner and in this situation we need a wifi signal booster that can extend our existing wifi network. This user guide will give you easy steps for Madpower WiFi Extender Setup with any brand wifi router.
The Madpower is a dual-band Ac1200 WIFI extender to an extended wifi network without connecting any physical lan cable and increases wifi range and speed in no coverage area. It a direct power plugin device that is compatible with most of the brands’ wifi access points.
There are two ways to set up Madpower WiFi extender device with your existing wifi network using login and without login methods. The fastest method to set up Madpower signal booster is the WPS push button method which only take a few seconds and no login is required. If you host a router old and do not support the WPS method then you can go with the login method to configure Manpower WIFI repeater device to boost the Wifi signal.
Get ready with your Mad power extender device and follow this Madpower wifi extender manual to configure your range extender in a few easy steps.
How to connect Madpower Range Extender using the WPS button?
The WPS method is an easy and faster way to connect a wifi extender device to any brand wifi access point without using any wifi password and connection from Laptop or computer. Setup steps for Madpower Ac1200, as well as Madpower N300 range extender, are the same so you can use this manual to configure any signal booster from Madpower. Follow the steps to connect Madpower WIFI extender setup using WPS button.
- Unbox Madpower extender device if set up the first time.
- Connect it to a power socket near wifi internet router.
- Go to your host internet wifi router and press the WPS button for 2 seconds and go to the Madpower extender.
- Within 2 minutes press the WPS button on the Madpower booster device for 2 seconds and release.
- Check Price Now
- THE WIFI LED light will start blinking after connection with the host wifi signal.
- You will get a new WIFI name postfix _Ext with your existing Wi-Fi name. Exp- if your existing wifi name is HOME-WIFI then the booster SSID will be HOME-WIFI_EXT and the wifi password will be the same as the existing wifi password.
- Go to mobile or Laptop and check the WIFI name for the Extender network to boost the wifi range.
- Unplug the extender device and place it in the location you facing a signal problem but make sure the host wifi router should be feasible and avoid using any covered place to connect the extender device.
If the Madpower WPS configuration not working or is not able to connect with your existing wifi network as following the above steps then you can use the next method using the Login method either using a wired or wireless connection with a Madpower booster device.
How to setup Madpower WiFi Repeater from web login?
Connecting Madpower Repeater device to an existing wifi network is a bit longer process and needs connection as well as the wifi password of the old wifi network if you want to increase the wifi range. You need to connect either wired or wifi for Madpower wifi extender login from a mobile or computer to connect wifi network.
- Unbox the Mad power signal booster and connect the power socket near the existing wifi router.
- Slide the side mode change button to select Repeater mode.
- For Wired connection using a LAN cable to connect from the Extender LAN port to Laptop/Computer LAN port.
- Connect the default Wifi extender SSID name to use the wireless connection.
- Find the default login IP address for the Madpower extender along with username and password for first-time login printed to the box and a quick user guide included with the device.
- Open the web browser and access Manpower defaults IP address to the URL bar.
- Use the default admin username and password to access the setup wizard to setup.
- The extender device will start scanning for wifi networking running nearby.
- Select your WIFI network name from the list and proceed next steps.
- Provide your existing wifi password to allow connection from the Mad power repeater.
- Extender network name – if you want to change the booster SSID name you can change as per your choice. The Extender SSId password will be the same as the existing wifi network.
- Press the next button to apply configuration and wait until the repeater device saving settings.
- After a few minutes, the range extender device will start broadcasting a new extender SSID name.
- After the successful configuration of the mad power, the extender unplugs it and finds an appropriate location to maximize your wifi range where you not getting the host router signal range.
How to access WiFi extender using WiFi and Wired?
Final words
The range extender is a smart way to boost wifi range and speed in no coverage area without using any physical wired connection from the host router. There are many different brands of booster device so while choosing an extender make sure it is compatible with every brand’s wifi router and support the Lan port also. Mad power extender support AP and router mode along with extender mode so you can use it as multiple wireless modes as per your requirement.
Related Post
- How to Factory Reset Wavlink Range Extender – 2 Methods
- How to Reuse old WiFi Router with Different Modes
- The Best WiFi Range Extender Device to boost Signal
- Best Cable Modem With Phone Jack | Buying Guide