192.168.0.2 a private IP address from C class IP Network 192.168.1.0 that starting IP address 192.168.0.1 and broadcast ID 192.168.0.255. any router, modem, WiFi Access point default gateway IP 192.168.0.2 means this IP is the default login IP address for the device to manage and setup for the first time.
Many router brands such as D-Link, Netgear, and Linksys, use the default login IP address 192.168.0.1 to access router settings. The login steps used for 192.168.0.1 is the same for 192.168.0.2 because its from the same networks.
The login guide for the 192.168.0.2 IP address is simple and uses the default login username password for any router that is usually printed to the router sticker as well as quick user guide. Default login Credentials for each brand’s router and modems can be different but the login process to open a router using IP address 192.168.o.2 is the same so you can follow this login manual to open your router settings.
Accessing any router, DSL modem or cable modem requires a connection from a PC/Laptop or mobile to open settings. You can use a Wi-Fi connection or a wired connection using a LAN cable from a computer or PC to access settings for the first time.
IP address 1921.68.0.2 Default Login username and password
Although default login details for each WiFi router and modem are printed on the sticker that can be different for each brand. However, here are some common and popular default usernames used by many leading outer brands that might work with your device if you lose the router sticker.
| Username | Password |
| Admin | Admin |
| Admin | Password |
| Admin | 1234 |
| root | Admin123 |
| User | admin |
Without login credentials for a router or any managed network device you won’t be able to access the control panel so only try access if you have login username and password. Now follow the next steps to connect between the router and mobile or PC.
Login 192.168 0.2 with Default username and password
You can access your wifi router, cable modem, DSL modem, NVR, DVR or any network device whose default login IP address is 192.168.0.2 from Mobile/Laptop/ PC depending on the Device supported interface. For NVR and DVR it doesn’t support Wireless so you can only access through a LAN cable connection and for WiFI modems and routers you can use wifi as well as wired connections.
- Power ON the router/modem/fiber modem and wait until it properly boots up.
- For a wired connection use the Cat6 LAN cable from the Router Ethernet port (LAN) to PC/Laptop Ethernet Port.
- For a WIFI connection use your WIFI name and password if already changed the default SSID and key and for the first time find the default WIFI name and password printed on the sticker.
- Open the web browser and access http://192.168.0.2 or 192.168.0.2 and wait until the router login page opens.
- Use the default username/password as you find from the router’s default credential details or use a new login password if you already updated the admin password before.
- Once you login into the router control panel you can navigate all the router settings such as Wireless, Internet, Management, system, security, and other settings.
How to Find Your Router IP Address
Change Wireless SSID Network name and password!
To change the WiFi SSID network name and password you have to go to Wireless settings. If you using a WIFI connection to access router settings from your mobile/laptop then after updating the new wifi name you will be disconnected and you need to connect it again.
Go to the Wireless tab from the settings menu which can be on top horizontally or in some routers it is left side Verticle depending on the router web Gui.
Wireless- Basic Settings.
For Dual-band WIFI routers, you will get two WIFI settings 2.4Ghz and 5.8Ghz.
Go to 2.4Ghz Wireless settings first and after updating 2.4Ghz settings change 5.8Ghz settings.
Basic Settings– 2.4Ghz
Radio- Enable
Wireless SSID- WIFI2.4G (Change the Wi-Fi name here that you wish to use for your wifi)
Channel -Auto
Channel Bandwidth– Auto
Wireless Security- WPA/WPA2_PSK_AES
Passphrase- WIFIPASSWordHERE (set new Wifi password here)
Save and apply settings and then connect again with the new WIFI name and password and follow the same steps to update the 5.8Ghz WIFI SSID and password.
If you facing any issues while trying to access your router web interface using 192.168.0.2 then you can follow below troubleshooting steps.
Why 192.168.0.2 Login IP address Not working?
IP address not working is a common issue and that can be multiple reasons behind it so you need to fix all the reasons one by one to fix it.
Make sure the 192.168.0.2 IP address is configured for the router lan IP and it’s the same printed on the sticker as the Default login IP address.
Use proper IP address ie 192.168.0.2 or http://192.168.0.2, not wrong IP address such as https://192.168.0.2,http//192.168.0.2,https//192.168.0.2,192.168.0.2.,192.168.0.2/,http //192.168.0.2 all are invalid address so you will face the problem.
If you trying to access the access point then make sure you have added the manual IP 192.168.0.10 address in your PC/Laptop Lan settings to access 192.168.0.2 as the access point works in bridge mode so you have to add a static IP address from the same series you wish to access.
What is the default username and password for 192.168. 0.2?
The default username and password is “admin” for most of the router brands. However, you can find the default username and password printed on the router sticker for your device.
How to access the router if forget the Password?
If you forget the login password after changing the admin password then you can restore router settings using the reset button.
Press the Reset button for 10 Seconds after properly powering the ON router. It takes a few minutes to restore settings and you can access the router in factory settings that need to set up again as per your internet settings.
How to Change Admin password for Router?
Changing default passwords is usually under the system or administration settings in most brands’ modems and routers.
Find Administration or System settings where you can find user account settings to change the Login password.
Related Post
- How to Fix spectrum DNS issues?
- 10.0.0.2 – 10.0.0.0.2 Admin Login Guide
- Login 192.168.10.1 IP Address with Default password
- 192.168.188.1 Admin Login Router Password