10.0.0.10 – 10.O.O.10 Router Login Admin Username and password
The IP address 10.0.0.10 is a less common default gateway, though it serves as the primary administrative login for several networking equipment brands. You will find it used by manufacturers including Celeno (VXT1025), BDCOM (GP1704F-E ONU), Billion, Intelbras, and certain TP-Link models, among others.
This address belongs to the 10.0.0.1 private network range, which is frequently reserved by manufacturers as a preconfigured Local Area Network (LAN) IP for their routers. If you need guidance on accessing the admin panel for a wireless router or cable modem using 10.0.0.10, you are in the right place.
It is important to note that many other common default gateway addresses exist, such as 192.168.1.1, 192.168.0.1, 192.168.0.254, and 192.168.2.1.
The 10.0.0.10 admin interface is secured with a unique default username and password in its factory state. While the credentials for the more common 10.0.0.1 may work on some devices, the most accurate login details are almost always printed on a sticker on the router itself or provided in the product’s installation guide.
To Access router webGui from your computer or mobile device must be connected to the router’s either using wired or wireless. This can be done via a Wi-Fi (WLAN) connection or, for modems without wireless capability, a physical Ethernet cable plugged into one of the device’s LAN ports.
If you cannot locate your credentials, a list of possible default username and password combinations for the 10.0.0.10 IP address is provided below.
Admin Default username and Password
Admin login password gives you full administrative rights to change and setup the router but if you have just a user credential with limited rights then you may not allow making changes such as changing the login password, firmware upgrade, and others that need admin rights. Find the default IP address and username password printed to the router sticker that works in default mode if the router has already not changed with a new login password.
Username | Password |
admin | admin |
admin | password |
na | admin |
user | 123456 |
admin | na |
admin | 1234 |
These are the most possible and popular login credentials used by many leading router manufacturers worldwide. First, get the login password and username available on the router sticker before trying these usernames and passwords.
Get login credentials for the 10.0.0.010 IP address and follow the next steps to access router settings from a web browser using a mobile or computer.
How to Fix WiFi Signal issue using Old WiFi Router
Access 10.0.0.10 from Web Browser
Before accessing 10. o.o.10 IP addresses from the web browser there are a few steps that need to process. Required wired or wireless connection with the modem or router you wish to access from the web browser. Need a login admin username and password that you can get from the router sticker. Working LAN cable if trying to access fiber ONT, Cable modem without wireless from a computer.
- Power ON Modem/router/ONT device using DC adapter comes with the device.
- Find the default SSID/ Network key to connect in default mode printed to the sticker for the Wireless router.
- Use LAN cable from the Router LAN port to a Desktop, Laptop LAN port for Wired connections.
- Go to computer/Laptop LAN settings and use static IP 10.0.0.2 or make it a DHCP option to get IP from the router DHCP server.
- Open a any web browser and access http://10.0.0.10 or 10.0 0.10 without HTTP:// and wait to load login page.
- Provide username and password to access router settings to set up the router.
After successful login into the web interface, you can change your Wireless SSID, Password, and other settings to secure your WIFI internet. If your router is already configured and wants to change wireless settings just follow the steps to change wireless settings.
Wireless SSID and WiFI Password Change
If your router support wirelesses your network is probably unsecured or using a compromised default wifi password that easy to get from a manual or official website. Follow the steps to change the WiFI name and password for your router.
Go to Wireless Settings from Settings
Wireless- Basic Settings
Wireless SSID Network name– Change WIFI name here
Wireless Channel-Auto
Wireless Password– WPA/WPA2_PSK_AES
WIFI Key- create a new WIFI password for your network that is stronger.
Save settings and your wireless configuration completed by changing your Name and password to secure your network. If your router IP 10.0.0.0.10 Not working or failed to load the login page may need to troubleshoot a problem that blocks the IP address from getting access from a browser.
Best VPN Routers Hardware for Home
How to Fix IP address 10.0.0.10 Not working?
IP address 10.0.10 not working or unable to access setting with default IP address or IP address taking too long time respond can fix by troubleshooting a few steps.
- Make sure the router you want to log in is powered on with a compatible DC adapter.
- If connected to a WiFI network make sure you are connected to the same Wireless SSID.
- Using LAN cable should be connected to the LAN port of the Router/Modem.
- Default login IP 10.0.0.10 should not be changed with any other IP address from a different IP series.
- Use proper IP address http://10.0.0.10 instead of using wrong IP 10.o.o.10, l0.0.0.10, 10.0.10, http//10.0.0.10 all will redirected to Error page.
- Do you forgot your login admin password or login password not working simply use reset button to resetting the modem to restore default settings..
How to Restore router IP 10.0.0.10 using the reset button
Factory restore router to default mode will erase all configuration made to the router and will restore into factory settings that printed to the router label.
- Turn ON the router/Modem and wait a few moment until its bootup.
- Find a small tiny recessed reset hole or reset button beside Ethernet or bottom side that depends on the router brand and model number.
- Press and hold the reset button for 10 seconds and keep monitor router led lights dramatically turn off and turn on again and router will restart..
- The router will automatically restart after executing the reset process and restore into default configurations.
- After resetting simply follow above steps to login router settings and setup it again.
Related Post
- TP-Link AC1200 vs Tenda AC1200: Which one Best for Home
- 192.168.7.1 Default Admin Login Router
- 10.1.1.1 Router Admin Login Username Password