X

Login 192.168.10.1 IP Address with Default password

192.168.10.1 Login Router User Manual

192.168.l0.1 is a C-class private IP address used for the local area network and the default gateway IP for network device login. 192.168.10.1 IP address used by Motorola cable modem default login IP address, Trendnet Login IP address, Zyxel and Repotec Wireless Device and Network Switches to login factory settings. If you have a router, Modem, or Network device whose default login IP address is 192.168.10.l and are unsure how to access the web interface to set up, read the full article.

This user manual provides you login default IP 192.168.1O.1 with the default login username and password. The purpose of the default gateway login IP address in Wifi router, modems, and other devices is to access the web interface to configure as per internet settings and customize other settings such as Wi-FI SSID, and Password.

The default username and password 192.168.1o.1

With the default LAN IP address also username and password are required for the first-time login which is printed on the router sticker and quick user guide. 192.168.10 1 is used by many leading brands so login username password might be changed as per the manufacturer’s default settings.

Find Router Login IP address and username password for your router backside sticker or Quick user manual included with the router box during the first-time setup.

Default gateway Login IP192.168.10.1

Username – admin  or user

Password– admin or password   or 1234 or DZY-W2914NSV2 for Wevo wireless router

To get exact login information about your device refer router manual and the sticker available on the router’s backside.

Steps to Login 192.168 10.1

  • Connect your router to either a wired or wireless connection using the default WiFi SSID and password.
  • Use RJ45LAN cable to connect from the router, Modem, Switch, or wifi Repeater device Ethernet port for wired connection.
  • Change the computer/Laptop LAN IP address to DHCP mode or use 192.168.l0.10 as a static mode to configure manually.
  • Power On a device with the adapter comes with the device and follows steps to access settings.

Best WiFi Router for Long Range

Open IP Address to the Web browser

Open a web browser and access http://192.168.1o.1 to the URL bar and hit the enter key.

Wait for a few seconds until the login page is loading. Provide default login username and password to authenticate.

192.168 10.1

After successful full authentication, you will land on the status or overview page of device settings.


F&A : Troubleshooting of 192.168.10.1

You may be facing a login issue while trying to access 192.168.10.l from a web browser due to various reasons that can be fixed using simple troubleshooting steps.

Why Can’t Access IP 192.168.10.1 to Browser?

If the 192.1668 10.1 IP address not working for your router and it takes a long time to respond that can cause network misconfiguration and other blocking issues.

Follow the steps to fix the login issue

  • Make sure the default login IP address you are accessing from the web browser is also printed to your router sticker for default login.
  • Windows firewall or Antivirus firewall should be disabled which might block the login IP address.
  • Make sure you are connecting the computer/Laptop from a LAN port, not a WAN to access settings.
  • The Computer LAN network IP address should be in the 192.168.10.0 network series to access the 192168.10.1 IP address.
  • Make sure you are typing http://192.168.10.1 instead of typing invalid IP address http //192.168.o.10.1 login or www 192.168 10.1 or 192.168.l0.1,192168101, 192 l.168.10.1,192.168 10.1, 192.168.l0.1,  login login to browsers will show an invalid or 404 error.

If you still facing issues then try resetting the device using the hard reset process to recover default login credentials.

What is the Default Username and Password for 192.168.10.1?

The default username and password for 192.168.10.1 is “admin” which is used by many leading brands. However, this IP address is used by many different brands so username and password can be different for some brands.

Which Brand Router and Modem using Login 192.168.10.1?

Many popular brands are using 192.168.10.1 such as Wavlink, WiFIBlast Booster, Arris, Trendnet, TP-Link, D-Link, Comfast, Cudy, MAginon, Jetstream, Keboox and many others.

How to Factory reset 192.168.10.1 IP Address?

Every network device that uses management from a web browser using a login IP address provides a reset button to a fail-safe process to restore default settings in case something went wrong and you lost access.

Steps to Factory Reset

  • Locate a small reset button available at the unit’s backside or beside Ethernet ports.
  • Press the reset button and hold for 10-15 seconds using the needle.
  • Release the reset button once the router reboot starts and led blinks again.

This process might take a few minutes to restore router settings to the factory mode.

Now again try the 192168101 login IP address to open the settings page.192\\

Final Word

Accessing the router using the default login IP address and URL is a simple and easy method but if you make it reset to face any error while accessing the IP address so, make sure you have a backup configuration file to restore after the factory reset device. If the default login 192.168..10.1 is not working for you before resetting the router try 192.168.0.1, 192.168.2.1, 10.0.0.1, and other common login IPs used by different brands.

Related Post

admin:

This website uses cookies.