First-time Setup Wavlink WiFi Repeater to extend existing wifi network to boost Wi-Fi signal range in every area.
192.168.10.1 Login and Setup Wavlink WiFi Repeater
Wavlink range extender device to repeat the WiFi signal range in the dead zone. Extend WiFi range with repeater device to avoid adding extra wifi router in the home where a single router signal cant be reached. Setting up the Wavlink ac750 dual-band range extender or AC1200 dual-band repeater device needs to configure as per the existing WiFi router. Wavlink repeater login 192.168.10.1 IP address from desktop or mobile can be used to set up in repeater mode. This post will help you with the Wavlink wifi range extender setup to boost the WiFi range.
However, you can connect the Wavlink repeater device using wifi or wired connection to wavlink setup the first time with the existing wifi network. if you don’t know the WiFi password of the host router just try the WPS button to setup wavlink wifi extender without login.
Wavlink Repeater Connection and Login First time
to start Wavlink setup first Plug the repeater device into the power wall socket and wait for power on or read Wavlink wifi repeater instructions manual that comes with the box.
- Power on Range extender device
- Go to the laptop or mobile WiFi and connect the Wavlink default WiFi name.
Wavlink default Login IP 192.168.10.1 and the default username and password is “admin”.
Login “192.168.10.1” WiFi repeater settings in the Web browser
Now open the web browser and access wavlink wifi extender with the default IP Address 192.168.l0.1 for wifi repeater login. If 192.168.10.1 not working and the page is not loaded try accessing “http//192.168.10.1”
Use default login admin for Wavlink router access.
Choose your language and press the submit button to access the setting.
Setup Repeater mode to join Wifi network
After login wifi repeater device will land on the status page.
Press the Repeater option button under the Wizard option as shown below the image.
Range extender device will scan all Wifi networks running nearby and the list will load.
Find your wifi SSID from the list and select network.
Provide wavlink-n Repeater Name and existing WiFi network password to allow connection from the Wave link repeater device.
Connect to – Existing Wifi SSID
Repeater SSID: set WiFi name for repeater Network.
Password: provide the WiFi password of an existing WiFi router.
Press the Apply button and wait to save settings.
Confirm all settings on the last page with details.
Press the close button to exit the configuration steps.
After configuration, finish. Now go to the mobile or laptop WiFi option and connect the Repeater device name.
Change default login IP Address Repeater
If using more than one repeater device in the same network then change the http //192.168.10.1 IP Address to any different IP to avoid network conflict issues.
Go to the Network option and click on the IP address option.
Change the 192.168.10.1 to 192.168.10.2 or any other IP Address and save settings. Login repeater with a new IP address again to make other changes.
Change Wavlink WiFi repeater Login Password
Every repeater device comes with a default password and it is highly recommended to update the login password.
Go to the Management option and Press on the Password option.
Provide the current password and create a new password.
Confirm the password again and save the settings.
Repeater Best Placement
To get a 100% signal and wifi connectivity range extender placement is the most important factor. Find the place where the booster device can get a 50% signal from the host WiFi router and it can cover the dead zone as well.
Never place a Repeater device under the cupboard and under the table.
Do not cover the extender device with any box.
Keep the device in an open place to make feasibility with the main WiFi router.
To know more best placement of repeater. After Setup Wavlink WiFi Repeater never underestimates range extender placement to get a stable network and increase WiFi speed.
Download Wavlink Range Extender User Manual in PDF for wifi repeater login and setup with any brands Wireless Router.
- How to Factory reset TP-Link Range Extender
- TP-Link WR743ND Range Extender Mode setup
- Netgear AC1200 WiFi Range Extender Setup
- How to login Aztech Router IP 10.0.10.254