How to Factory reset Netgear Range Extender?

Range extender is used to boost the wireless signal to extend the existing network. Wireless range extender also called WiFi repeater device to increase Wireless range in no coverage area. Netgear universal range extender device is available with multiple models as per the speed and single-band dual bands. There is some popular range extender device model is Netgear WiFi Extender WN3000RP, ‎N300-WiFi Range Extender, EX2700, and other models. It is available with 150Mbps to 750Mbps and Netgear AC1200 WiFi range extender with the single and dual-band both.

WiFi Repeater Vs Range Extender?

Universal Netgear range extender device compatible with Netgear and different brands Access points also. Configuration of the Netgear extender device is quite simple and can setup from mobile as well as computers. In this post get the simple user guide to factory default Netgear range extender device from software and reset button. If you have any Netgear repeater device model then this user guide will help you restore factory settings.

How to Fix WiFi Signal issue using Old WiFi Router

Way to factory reset Range extender device!

There are two methods to factory default Netgear wireless extender devices using soft reset and hard reset.

1: Soft Reset

A soft reset is called a software reset. It means making a device factory reset from the web interface. Making soft reset only possible after login repeater device and access system tools. You need a login IP address, username, and password to log in to the repeater device to execute a soft reset.

2: Hard Reset

Hard reset called hardware reset. Hardware reset means making a physical reset device from the reset button available in the device.

Every router and repeater device comes with a reset button to restore fail safe made in case of forgotten login details. A hardware reset is useful when forgetting IP address, username, or password to access the web interface.

How to Choose Best Wi-Fi Range Extender

Steps to Factory reset Netgear Range Extender

Netgear WN3000RP 300Mbps universal wi-fi range extender or any other model factory reset can be done with login and without the login web interface.

Note: making a factory reset erases all the configuration saved in the router or range extender device. Before making a reset to default make sure you have all configuration settings to confirm again to make working again.

Method 1: Reset Device from the Web interface

You are required to log in the range extender device to factory reset from the software. You can only reset from the software if you have a login username and password.

Connect repeater device using wired from LAN port or Wireless using WiFI name.

How to access WiFi Router settings using WiFi and Wired?

Netgear Range Extender Default Login IP Address/ URL: www.mywifiext.net

Default username: admin

Default password: password

Default Router IP Address Username and Password All Brands

Open Web browser and access http:// www.mywifiext.net
Username “admin” and password “password” for both for first-time login.

If you have a change login password already use the same password to the login web interface.

Click the menu icon
Settings > Other Settings
Backup Settings

Tips: Before executing reset take the configuration backup to restore configuration after factory default range extender to avoid long downtime.

Press the Reset button to restore the configuration.

You will get a confirmation for the factory default repeater device.

Confirm OK and wait until the device reboots.

These steps make the software reset the device to the range extender.

How to turn wired IP Camera into Wireless camera

Method 2: Hardware reset Netgear Repeater device

Making a hard reset from the reset button does not require connecting and login web interface.

Connect rang extender device to wall socket and let it power on.
Use a needle to press the reset button.
Find the factory reset button with a small hole available in the device.
Press and hold the reset button for 7-10 seconds and release the button to factory default.

Wireless extender devices will start rebooting after a successful reset.

This method is called hardware reset or hard reset of the range extender device.

How to Fix WiFi Signal issue using Old WiFi Router

When using the Factory reset option?

The Factory restores option is a fail-safe mode to recover router and other network devices in case forget login IP address, username, and password.

IP Address not working or forgotten after change default IP address.
Hard reset range extender if forget login password and username.
If the range extender device not working properly or connecting disconnecting issue facing then make software reset to fix the issue.

Final Word

Use the reset default router or repeater device only if it is strongly required. Avoid making a factory reset in case you have no information about configuration detail to set up the device again. Always try to use software reset from the settings page and take configuration backup of settings to avoid disconnection of the internet after the factory reset. The above steps for factory reset Netgear WiFi extender device work with any Netgear wireless extender models.